Improving comfort and tolerance to NIV for home-based patients.
Using the MR810 Respiratory Humidifier, a F&P humidification chamber and the Evatherm Heated Breathing Circuit, the F&P 810 System delivers humidity to patients requiring NIV at home. Heated humidification is highly suggested for use with NIV therapy for improved comfort.1
The MR810 Humidifier is at the heart of the F&P 810 System.
This humidifier supplies, monitors and controls heat to the humidification chamber to heat the water it contains. As respiratory gas passes over the heated water, it increases in humidity and temperature.
It also controls heating in the heated respiratory circuits, such as the Evatherm Breathing Circuit. This heating maintains the surface of the breathing tube at a higher temperature than the humidified gas passing through, reducing the potential for condensation.
The F&P 810 System has the following features and benefits:
Therapeutic levels of warm, humidified gas
This active, heated humidifier is designed for use with a home ventilator to provide therapeutic levels of warm, humidified gas to patients.
Temperature and humidity adjustment
There are three incremental temperature levels (low, medium and high), which facilitate temperature and humidity adjustment.
Condensate management
An Ambient Temperature Sensor monitors room temperature to enable the humidifier to manage condensation in conjunction with the heated breathing circuit.
No additional temperature probes
The Ambient Temperature Sensor is built into the system while the heater-wire adapter comes permanently attached to the unit.
Delivering respiratory gas between the ventilator, humidifier and the home-based ventilator patient.
The Evatherm Breathing Circuit has a heater wire embedded in the wall of the breathing tube, connecting the MR810 Humidifier to the patient and reducing the potential for condensate.
Single-limb, vented-mask setup example using the F&P 810 System
Example setup only. Not all accessories shown are included in F&P 810 System circuit kits. Follow all relevant protocols and user instructions. This example is summarized and provided for illustrative purposes only. Not all products are available in all markets.
Condensate performance of the F&P 810 System
Minimizing condensate (rainout)
The graph illustrates the synergies between the MR810 Humidifier and the Evatherm Breathing Circuit. This combination reduces condensate by up to four times compared with a non-heated reusable breathing circuit.*
*Based on Fisher & Paykel Healthcare internal testing results on the heated Evatherm Breathing Circuit vs. F&P non-heated breathing circuit, flow of 15 L/min at 22 °C.
Contact Us
If you have an enquiry about our products, please provide the following information so a Fisher & Paykel Healthcare representative can contact you. For further details on how this information will be used, see below or go to our privacy statement.