Support resources
Our classic, ergonomic and humidified T-piece circuits can be connected to a mask or endotracheal tube and they all feature positive end-expiratory pressure (PEEP) valves for adjusting pressure.
Classic T-piece circuit
The classic T-piece circuit has a standard T-piece to connect to a mask or endotracheal tube along with a PEEP valve to adjust pressure.
Ergonomic T-piece circuit
In addition to the classic T-piece features, the ergonomic T-piece circuit includes a duckbill port for suctioning and delivering surfactant during resuscitation.
This T-piece circuit also has a blue protective cover that can be used to set and check pressure. The angled orientation of the PEEP valve has been designed to allow operators to use a more ergonomic hand position.
Humidified T-piece circuit
F&P Healthcare’s humidified T-piece circuit, incorporating a spiral heater-wire throughout the circuit tubing, is designed to deliver warm, humidified gas using the F&P MR850 heated humidifier and the MR290 auto-fill humidification chamber.
Resuscitation with heated and humidified gas is associated with a higher rate of normothermia (rectal temperature between 36.5 °C and 37.5 °C) on admission to the neonatal intensive care unit (NICU).1
Product codes
| Product code | Description | Quantity |
| 900RD010 | Single-use classic T-piece circuit* | 10/box |
| RD1300-10 | Single-use ergonomic T-piece circuit* | 10/box |
| 900RD110 | Single-use humidified T-piece circuit** | 10/box |
Suitable for use with the:
* Neopuff™ T-piece resuscitator
** Neopuff T-piece resuscitator and the F&P 850 System (when delivering humidified resuscitation)
This product is not available for purchase by the general public. Always follow the directions for use.
F&P, Neopuff and F&P 850 are trademarks of Fisher & Paykel Healthcare Limited. For patent information, see www.fphcare.com/ip